All columns of 3 rd sty at Sectot ”B” completed and formwork and rebar work leading to 3 rd sty in progress.

The M&E Workers are doing installation of pipe sleeve for plumbing & sanitary and laying conduits for electrical works.

Casting of 3rd sty Podium ( Car-Park ) Slab in Progress

Construction Joints at beams and slab are properly placed using hyrib material with proper support.

The Concrete Pump is pouring concrete to the Column Cap at CB-13 of Sector “A “ at Transfer Plate.

The Surveyor is doing setting out lines for Stair-Case “1” and some other grid lines at 3rd sty Slab.

Casting of Plinths for Coling Tower at 2nd Sty is being done.

Laying of Electrical Conduit of new mail box area at 3rd sty slab is in progress.

Erection of formwork for slab recess area due to M&E Services is completed at Sector “A” of Transfer Plate.

Internal Scaffolding are being erected according to the temporary work designed and P.E will inspect internal/cantilever platform before 1st cast of Transfer Plate.

Column Starter bar ( Type: C3 ), have been planted next to M&E pipe sleeves as per approved drawings.

Bottom reinforcement at slab recess area of Sector “A” has been completed.

Formwork erection of Sector “C” is partially completed and Supervisor is using level instrument to check formwork is correct within tolerance.

The removal of loose concrete is being done at Column cap before laying of reinforcement at Transfer Plate.

Preparation work for UB installation of temporary cantilever platform next to Service Lift at 3rd sty in progress.

Rebar, formwork & casting of columns at Swimming Pool area in progress.

Testing Specialist is doing UPV test of CB-10 at 2nd Sty witness by Prof: Dr. Dias, Mr. Stephan & Mr.Dillip of AHPL, Mr.Kumudu & Mr. Indrajith of PA and SPACE Staffs.

Prof: Dr. Dias is recording the readings from UPV Test for his analysis for quality of Concrete.